[. . . ] CD PLAYER
CD/DPF-R SERIES
CD-206 CD-204 CD-203 DPF-R6010 DPF-R4010 DPF-R3010
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is used for six models. Model availability and features (functions) may differ depending on the country and sales area.
DTS disclaimer clause
When Playing DTS-encoded CDs, excessive noise will be exhibited from the analog stereo outputs. The consumer should take proper precautions when the analog stereo outputs of the CD player is connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5. 1 channel DTS Digital Surround decoder system must be connected to the digital output (S/PDIF, ASE/EBU, or TosLink) of the CD player.
B60-3684-00 CH ( K, P, Y, M , X , T ) I D 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1
Introduction
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
2
Before applying power
Units are designed for operation as follows. [. . . ] ÷ When there is no text information to be displayed " " is scrolled on the display. ÷ In the case of a non-CD-TEXT disc, the "NO CD TEXT" display will appear for approx. 3 seconds.
Programmed play (PGM mode)
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
14
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Preparation
Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010. ÷ Load a disc in the CD player.
REMOTE CONTROL UNIT
RC-P0601
: Keys and controls used in the operations described on this page.
1 Press so that the "PGM" indicator lights.
Do this operation in the stop mode.
P. MODE
CD-206/DPF-R6010
Blinks.
PGM01 DISC?
CD-204/203/DPF-R4010/R3010
Light up.
PGM
2
1
2
3
4
5
Program desired tracks.
1 Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
P GM 0 1 D 1 T NO. ??
In the case of a CD-TEXT disc, the disc title is scrolled on the display. 25 : 005 Go to step 2 within 8 seconds.
CD-206/DPF-R6010
P GM 0 1 D 1 T NO. 25
2 Select the desired track No.
Main unit
4 ¢
4 5 6
«
3
Remote control unit
1 2
PGM01 ABCDEFGH
In the case of a CD-TEXT disc, the track's title is scrolled on the display.
7
8
9
0
+10
P GM 0 1 D 1 T NO. REPEAT TRACK NO.
Go to step 3 within 8 seconds.
5
3 Set the entry.
1 2 3 4 5
P. MODE
1 25 P_ 01
Track number
4 Repeat steps 1, 2 and 3 above.
÷ Tracks can also be selected by pressing the 4 or ¢ key. ÷ If you make a mistake, press the CLEAR key and enter the track No. from the beginning.
3 Start playback.
6
÷ When the 4 or ¢ key is pressed during playback, the track will be skipped in the direction of the pressed button. ÷ When the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played.
Programmed play (PGM mode)
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
To stop playback
7
15
÷ The programmed contents remain in memory.
To check or change the programmed tracks
1 Press the CHECK key.
CD-206/DPF-R6010
CD-206/DPF-R6010
Blinks.
P GM 0 1 D 5 T NO. 25
CHECK
REMOTE CONTROL UNIT
RC-P0601
Press until the track No. to be changed is displayed.
CD-204/203/DPF-R4010/R3010
Light up
CD-204/203/DPF-R4010/R3010
CHECK
DISC NO.
REPEAT TRACK NO.
P. C.
7
Press until the track No. to be changed is displayed.
5 25 P_ 01
2 Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
÷ Perform only step 1 to simply check the program. ÷ In the case of a CD-TEXT disc, the track's title is scrolled on the display. (CD-206/DPF-R6010 only) ÷ Each time the key is pressed, the program No. on CD are displayed.
3 Select the new track No.
Main unit
4 ¢
4 5 6
Remote control unit
1 2 3
7
8
9
÷ Press it while the "PGM 01" indicator blinks. (CD-206/DPF-R6010 only) ÷ Press the key while the "P. C. " indicator is lit. (CD-204/203/DPF-R4010/ R3010 only) ÷ The track being played cannot be changed.
Example
0
+10
4 Set the entry.
P. MODE
To add a track to the program
1 Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
2 Select the desired track No.
Main unit
4 ¢
4 5 6
Remote control unit
1 2 3
÷ When a track No. is selected, the track will be added to the end of the existing program.
7
8
9
0
+10
3 Press the P. MODE key.
Programmed play (PGM mode)
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
16
To clear tracks from the program
Press to clear tracks from the end. CD-206/DPF-R6010
CLEAR
÷ Each time the key is pressed, the last track in the program is cleared. ÷ The tracks which are programmed earlier than the track being played cannot be cleared.
REMOTE CONTROL UNIT
RC-P0601
CD-204/203/DPF-R4010/R3010
CLEAR
To clear all tracks
P. MODE
÷ Selected tracks can be also completely cleared just by operating the 0 key. [. . . ] 20 mW (32 ) [ General ] Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W : 440 mm (17-5/16") H : 125 mm (4-15/16") D : 397 mm (15-5/8") Weight (Net) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. 0 kg (11. 0 lb)
CD-204/203/DPF-R4010/3010
[ Format ] System . . . . . . . . . . . . . . . . . . . . . . . . . . Compact disc digital audio system Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]